Made To Measure Roman Blinds
How to measure up for your roman blinds:
Inside a window recess
Width
Measure across the recess at several points and give the narrowest measurement minus 1cm for clearance so the blind will run freely (See E on the diagram)
Length
Measure from the top of the recess to the bottom (See E on the diagram)
Outside a window recess
Width
Measure the width of the recess and add at least 5cms on each side for overlapping (See F on the diagram)
Length
Measure from the required starting position above the window to the length you require
This is a traditional folding blind. The made to measure roman blind is supplied with two options:-
1) A wooden baton with a corded pull. Also provided will be an acorn and 2 cleats.
2) Or fixed to a rotary chain track with the choice of the following bead options clear, chrome, white & brown.
Both options are available. However, we would advise, due to increased health and safety restrictions, that blinds over 1.2m in width are ordered on a rotary chain track.
